Showing posts with label audio. Show all posts
Showing posts with label audio. Show all posts

2012-03-05

Music Player Daemon & Co.

Since installing subsonic is so easy to set up, I looked for another challenge: MPD.

I tried to use Rhythmbox and Banshee as players on my computer dedicated for audio outputs. If the music is located elsewhere on the LAN, both ended up unable to index 100+Gb music, and since I do not like their GUI anyway, I found out another possible solution with MPD.

Installing and setup for Ubuntu 11.10

1. Install

sudo apt-get install mpd mpc gmpc

This will retrieve mpd together with the command line player mpc and the Gnome client gmpc, for those GUI users.

2. Configure

Some guides I found (most of them) explain how to set up mpd on a system using root rights. I preferred to get everything installed for my current user, mainly to be easier to port to another installation later on, and also because I just like simple backup from user home directory. So instead of following guides creating a mpd directory on /var/lib and using a /etc/mpd.conf, I choose to create a mpd directory under the home directory, and use a .mpdconf file.

Following commands are enough to create required directories and starting with a new configuration file.

cd ~
mkdir mpd
mkdir mpd/playlists
gedit .mpdconf

Here is my configuration file (.mpdconf). The music_directory and the playlist directory should exist, according to previous commands.

# Files and directories #######################################################
#
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
#
music_directory         "~/Music"
#
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
#
playlist_directory              "~/mpd/playlists"
#
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
#
db_file                 "~/mpd/mpd_db"
#
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
#
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
#
log_file                        "~/mpd/mpd.log"
#
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
#
pid_file                        "~/mpd/pid"
#
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
#
state_file                      "~/mpd/state"
#
# The location of the sticker database.  This is a database which
# manages dynamic information attached to songs.
#
sticker_file                   "~/mpd/sticker.sql"
#
###############################################################################


# General music daemon options ################################################
#
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
#
#user                           "mpd"
#
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#
#group                          "nogroup"
#
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon. Choose any if you want
# to have mpd listen on every address
#
# For network
bind_to_address         "localhost"
#
# And for Unix Socket
#bind_to_address                "/var/run/mpd/socket"
#
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#
port                            "6600"
#
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#
#log_level                      "default"
#
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available as vbrfix in the debian archive), at which
# point gapless MP3 playback can be enabled.
#
#gapless_mp3_playback                   "yes"
#
# This setting enables MPD to create playlists in a format usable by other
# music players.
#
save_absolute_paths_in_playlists        "no"
#
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#
#metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
#
# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
#
auto_update    "yes"
#
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself.  There is no limit by default.
#
#auto_update_depth "3"
#
###############################################################################


# Symbolic link behavior ######################################################
#
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#
follow_outside_symlinks "yes"
#
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#
follow_inside_symlinks          "yes"
#
###############################################################################


# Zeroconf / Avahi Service Discovery ##########################################
#
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#
zeroconf_enabled                "yes"
#
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#
zeroconf_name                   "Not-o-Matic Music Player"
#
###############################################################################


# Permissions #################################################################
#
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#
#password                        "password@read,add,control,admin"
#
# This setting specifies the permissions a user has who has not yet logged in.
#
#default_permissions             "read,add,control,admin"
#
###############################################################################


# Input #######################################################################
#

input {
        plugin "curl"
#       proxy "proxy.isp.com:8080"
#       proxy_user "user"
#       proxy_password "password"
}

#
###############################################################################

# Audio Output ################################################################
#
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
#
# See  for examples of
# other audio outputs.
#
audio_output {
        type            "alsa"
        name            "MPD ALSA Output"
        device          "hw:0,0"        # optional
        format          "44100:16:2"    # optional
        mixer_type      "software"
        mixer_device    "default"       # optional
        mixer_control   "PCM"           # optional
        #mixer_index    "0"             # optional
}

audio_output {
        type    "pulse"
        name    "MPD PulseAudio Output"
        #server  "localhost"   # optional
        #sink    "alsa_output" # optional
}

audio_output {
        type            "httpd"
        name            "MPD HTTP Stream"
        encoder         "vorbis"                # optional, vorbis or lame
        port            "6680"
#       quality         "5.0"                   # do not define if bitrate is defined
        bitrate         "192"                   # do not define if quality is defined
        format          "44100:16:1"
}

# Character Encoding ##########################################################
#
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting. After modification of this setting mpd
# --create-db must be run to change the database.
#
filesystem_charset              "UTF-8"
#
# This setting controls the encoding that ID3v1 tags should be converted from.
#
id3v1_encoding                  "UTF-8"

Running MPD

Now it is already time to hear some music!
Just enter following in your terminal:

mpd
Yes, this is all!

Running the gnome MDP client

Once the client is running, in the Server-menu, there is an Update entry. This will populate the music database with data found under the ~/Music directory, and music will be shown in the left panel. From here, it is easy to get music played.

Problems?

Note that if all sounds easy, it is also easy to miss a small part of these steps, and no music will be played. There is some things to check, in order to find out possible problems.

  • Check that sound is working, using Rhythmbox for example, and playing a local music file.
  • Check that all pathes are correct. A wrong path to the music will be problematic for mpd to find any music. A non existing path for the database file will also be problematic to populate the database with content.
  • Still no music? Using Ubuntu Unity, I could play without problem the music, but not under XFCE. This was because of muted sound on the login screen!

Bonus: Client175

Now, once MPD is running smoothly on the audio box, perhaps (probably) one would like to control the music from other devices.
There is a huge list of clients for MPD here: http://mpd.wikia.com/wiki/Clients.
However, some of them are old/abandoned/unfinished projects. This requires a bit of searching to get the one(s) you like.

A simple web access can be achieved using Client175. The setup does not require anything to run correctly (based on my .mpdconf). I just created a folder for the client175 files under my mpd directory, and started it with python server.py. Then accessing from another box with your prefered browser is enough to enjoy it (default port is 8080, not to forget when trying to connect ;) ).

2011-04-03

Subsonic refusing to play some OGG files

I stumbled upon some tracks refusing to be played in subsonic when using the web-player (no problem in jukebox mode). The web-player mode is doing some transcoding with ffmpeg, the jukebox mode does not requires it. OGG files were not affected by this problem.

Some errors from the log file around the problematic file:
DEBUG InputStreamReaderThread - (/var/subsonic/transcode/ffmpeg) [NULL @ 0x9b45bc0]Format detected only with low score of 24, misdetection possible!
DEBUG InputStreamReaderThread - (/var/subsonic/transcode/ffmpeg) [mp3 @ 0x9b46df0]Header missing

Looking closer to the problematic files showed an ID3v2 header at begin of the file, followed by the expected Ogg header. After removing the ID3v2 header (using the great 'tag'), the problem was gone.

This just showed that ffmpeg is a bit sensible to the tags in the audio files. Of course, these tags should not have been there. However, VLC and foobar had no problem with these (buggy) files.

Non-root subsonic installation

I choose already for some time subsonic as music streaming and jukebox system. This was working well with the basic installation information provided from the website:

sudo apt-get install openjdk-6-jre
sudo dpkg -i subsonic-x.x.deb
sudo apt-get install lame flac faad vorbis-tools ffmpeg

First problem: no sound in jukebox mode. The solution is to install the java from sun, and use this one instead of the openjdk provided by default.

sudo apt-get install sun-java6-jre sun-java6-plugin

Installing is only half of the job. Selecting what java to use is done with following command:

update-java-alternatives -s java-6-sun

Second problem: subsonic is now running as root. This is not a big deal when the server is intended to be use behind your firewall, but becomes a bit scary when allowing access from internet. The solution is described in the official subsonic forum. I preferred the second post of the thread explaining how to do the changes to run as a specific user still using the simple package based installation. The first post requires to configure your own web-server, a bit more complex for similar result.

I used slightly different commands:
sudo su
service subsonic stop
adduser --system --no-create-home subsonic
adduser subsonic audio
chown -R subsonic:nogroup /tmp/subsonic 
chown -R subsonic:nogroup /var/subsonic 
chown -R root:root /var/subsonic/transcode 
chown -R root:root /var/subsonic/jetty/*/webapp

Now we need to edit /usr/share/subsonic/subsonic.sh to use sudo -u subsonic before the call to java. The line looks like that with the change applied:

sudo -u subsonic ${JAVA} -Xmx${SUBSONIC_MAX_MEMORY}m \

Now subsonic can be started, and we can verify it uses the correct assigned user instead of root. Start subsonic: service subsonic start.

ps -Af | grep subsonic shows what user runs subsonic.

To finish, enjoy some music :)